Connecting The Product To The App; Disconnecting - Silvercrest SSRA1 Manual

Connecting the product
to the app
When the robot vacuum cleaner beeps and the
WiFi indicator stays on, the robot vacuum cleaner
successfully connected to the WiFi network.
The first user connecting to the product becomes
the administrator for the product. Only the adminis-
trator is able to share the product with other users.
Other users can only disconnect from the product.
After successfully connecting, the app will
open a pop-up window where you can assign
a name to your robot. Then click "Confirm".
The app will then automatically switch to the
"Robot" menu.
Note: if the robot vacuum cleaner is turned off
and you want to reconnect it to WiFi, turn on the
robot vacuum cleaner and it will automatically
reconnect to the same WiFi network.
Note: administrator rights are linked to the
e-mail address.
309029_1901__silv_Saugroboter SSRA1_content_US.indd 19

Disconnecting

Disconnecting through the administrator
In the "Robot" menu, select your robot and
swipe left.
Click "Disconnect".
Disconnecting through the robot vacuum
cleaner
Turn on the robot vacuum cleaner and wait
30 seconds to determine if the robot vacuum
cleaner connects to the WiFi network. If the ro-
bot vacuum cleaner is connected to the network,
it will beep to remind you and the WiFi indicator
on the robot vacuum cleaner will switch from
flashing to steady.
While connected to WiFi, hold the "Spot mode /
Time down" button
15
cleaner for 4 seconds until you hear a beep.
The robot vacuum cleaner has been disconnected
from all users. The consumer can then restart the
robot vacuum cleaner and connect to it.
on the robot vacuum
US-EN 19
11.09.19 08:26