Connecting The Product To Wifi - Silvercrest SSRA1 Manual

If you are not logged into your account, click
"Add robot" or "+". The app swill then auto-
matically switch to the Login menu.
Enter your e-mail address and password and
click "Login".
After successfully logging in, the app will auto-
matically switch to the "Robot" menu.

Connecting the product to WiFi

18 US-EN
309029_1901__silv_Saugroboter SSRA1_content_US.indd 18
Choose a 2.4 GHz WiFi network (the robot
vacuum cleaner will not connect to 5 GHz
WiFi networks) with a strong signal in your
smartphone settings to connect your product.
Verify your WiFi network allows devices.
Set the power switch on the robot vacuum
9
cleaner to "–".
Hold the "Spot mode / Time down"
the robot vacuum cleaner for 4 seconds until you
hear a beep.
In the "Robot" menu, click "Add robot" or "+"
to add the robot vacuum cleaner.
Select robot model "SSRA1".
Please note the assistance in the app and click
"Continue".
In the "Network configuration" menu, enter
your WiFi password, then click "Continue".
Click "Settings", navigate to "Settings / WiFi"
on your smartphone and select the network
"Robot-XXXX".
Return to the app and verify a robot network
(Robot-XXXX) is selected under "Robot hotspot".
Click "Connect" to connect to the WiFi network.
The robot vacuum cleaner should now connect.
button on
15
11.09.19 08:26