Virtual Wall; Scheduling - Silvercrest SSRA1 Manual

Hide thumbs Also See for SSRA1:
Table of Contents

Advertisement

Virtual wall

The virtual wall
divides your home into separate
5
areas to improve the cleaning efficiency of the product.
For better performance, place the virtual wall
at a door or in front of a passage less than 9.84 ft
(3 m) wide.
The virtual wall
5
which blocks the product across a length of up
to 9.84 ft (3 m).
Before using the virtual wall
stall 2 AA batteries (included). Open the battery
cover and insert the batteries. Please note the
indicated polarity.
Slide the switch on the virtual wall
to turn it on.
The virtual wall
5
laser is parallel to the floor and battery com-
partment on the bottom.
Slide the switch on the virtual wall
when it is not in use.
Position your robot vacuum cleaner in the
"cleaning area" as shown.
16 US-EN
309029_1901__silv_Saugroboter SSRA1_content_US.indd 16
5
creates an invisible barrier
you need to in-
5
to "ON"
5
must be positioned so the
to "OFF"
5
Area
Area

Scheduling

For easy cleaning you can program the time and
a schedule for future cleaning on the robot vacuum
cleaner or in the app.
Setting the time
Hold the "Set schedule" button
with the robot vacuum cleaner "awake". The
robot vacuum cleaner will beep, the display
will flash and the robot vacuum cleaner will enter
Set Clock mode.
Press the "Time down / up" buttons
set the current time. Use the "Set schedule"
button to switch between minute, hour and day.
Press the "Auto mode" button
down / up
,
to switch between 12 and
15
16
24 hour mode.
After setting the time, press the "Start / Pause"
button
to save.
12
Note: if no buttons are pressed within 15 sec-
onds, the robot vacuum cleaner will exit Set
Time mode and the setting will be lost.
Programming the schedule
Press the "Set schedule" button
bot vacuum cleaner "awake". The robot vacuum
cleaner will beep and "Symbol" and "MON"
will flash. The robot vacuum cleaner will enter
"Set schedule mode".
Press the "Time down / up" buttons
set the desired cleaning time. Use the "Set
: outside work area
: work area
for 2 seconds
14
1
,
to
15
16
14
or Time
13
with the ro-
14
,
to
15
16
11.09.19 08:26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents