Table of Contents
Advertisement
3. release tab (2)
5. backplane signal cable
7. hard drive/SSD connector (4)
Figure 62. Installing the eight 2.5-inch SAS/SATA backplane
1. hard drive/SSD backplane
3. backplane signal cable
5. release tab (2)
7. hard drive/SSD connector (8)
Next steps
1. Install the hard drives in their original locations.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
Installing a hot-swappable hard drive carrier
Removing the hard drive backplane
Related reference
Safety instructions
Control panel
The control panel contains the power button, the diagnostic indicators, and the front USB ports.
Removing the control panel
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
4. backplane power cable
6. SAS_A connector on the backplane
2. backplane power cable
4. SAS_A cable connector
6. SAS_B cable connector
Installing and removing system components
107
Advertisement
Table of Contents
Troubleshooting
