Table of Contents
Advertisement
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver handy.
Steps
1. Using a Phillips #2 screwdriver, remove the screw(s) securing the control panel to the chassis.
CAUTION:
Do not use excessive force when removing the control panel as it can damage the connectors.
2. Release the locking tabs of the control panel by angling up the control panel and away from the system.
3. Remove all the cables connecting the control panel to the chassis.
Figure 63. Removing the control panel—four 3.5-inch hard drive chassis
a. control panel
b. notches (6)
108
Installing and removing system components
Advertisement
Table of Contents
Troubleshooting
