Table of Contents
Advertisement
3. fan cable connector
5. PSU cables to the system board (3)
Related tasks
Before working inside your system
Removing a cabled power supply unit
Installing the power interposer board
Related reference
Safety instructions
Installing the power interposer board
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Align the power interposer board (PIB) with the standoffs on the chassis.
2. Install the two screws that secure the PIB to the chassis.
3. Connect the power distribution cables to the system board and fan cable connector to the PIB.
Figure 72. Installing the PIB
1. standoffs (2)
3. fan cable connector
5. power supply cables to the system board (3)
Next steps
Follow the procedure listed in the After working inside your system section.
4. screw (2)
2. PIB
4. screw (2)
Installing and removing system components
115
Advertisement
Table of Contents
Troubleshooting
