Opening The Box; Identification - ABB 266 HART Series Operating Instruction

4 Opening the box

4.1 Identification

The instrument is identified by the data plates shown in Figure 3.
The certification plate (ref. A): contains the certification related
parameters for use in Hazardous area.
The Nameplate (ref. B), always made of AISI 316 ss, provides
information concerning the model code, maximum working
pressure, range and span limits, power supply, output signal,
diaphragms material, fill fluid, range limit, serial number, maximum
process working pressure (PS) and temperature (TS).
The Tag plate, instead, provides customer tag number and
calibrated range.
Both certification and tag plates are supplied self-adhesive
attached to the electronics housing, as standard. Option I2 allows
to select these plates as metal AISI 316 ss fastened to the
electronics housing with rivets.
The instrument may be used as a pressure accessory (category
III) as defined by the Pressure Equipment Directive 2014/68/EU.
In this case, near the CE mark, you will find the number of the
notified body (0474) that have verified the compliance. 266
pressure transmitters are in compliance with EMC 2004/108/CE*.
The certification plate (ref.A) shown here is issued by ABB
S.p.A, 22016 Tremezzina, Italy, with the numbers:
— FM09ATEX0023X or IECEx FME 16.0002X (Ex d)
— FM09ATEX0024X or IECEx FME 16.0003X (Ex ia)
— FM09ATEX0025X or IECEx FME 16.0004X (Ex ic) (Ex nA)
CE-Identification number of the notified bodies to Pressure
Equipment Directive: 0474, to ATEX certification: 0722, to
IECEx certification: IT/CES/QAR07.0001.
Figure 3: Product identification
*
C and F sensors on gauge and absolute pressure transmitters are in compliance with IEC61000-4-6 with B criteria
10 OI/266/HART-EN Rev. M | 2600T Series Pressure transmitters
Calib.
Range
2600T
Tag
Number
PRESSURE TRANSMITTER
The certification plate (ref.A) shown here may also be issued
for:
— ABB-APR, 32425 Minden, Germany.
number of the notified bodies to Pressure Equipment Directive:
0045, to ATEX certification: 0044, to IECEx certification: DE/
TUN/QAR06.0012/01.
— ABB India Limited, 560058 Bangalore, India.
CE-Identification number of the notified bodies to ATEX
certification: 1725.
— ABB Engineering Limited,
CE-Identification number of the notified bodies to ATEX
certification: 1725.
B
4 Opening the box
CE-Identification
Shanghai 201319, P.R. China.
C
A