Lenovo ThinkSystem SR650 Series Setup Manual page 55

Hide thumbs Also See for ThinkSystem SR650 Series:
Table of Contents

Advertisement

Server model: four 2.5-inch SAS/SATA drives, four 2.5-inch SAS/SATA/NVMe drives, the rear hot-swap
drive assembly, one 24i RAID adapter
Note: The cable routing illustration is based on the scenario that the rear hot-swap drive assembly is
installed. Depending on the model, the rear hot-swap drive assembly and the cable
on your server.
Figure 28. Cable routing for server models with four 2.5-inch SAS/SATA drives, four 2.5-inch SAS/SATA/NVMe drives,
the rear hot-swap drive assembly, and one 24i RAID adapter
Cable
1
2
3
4
From
Power connector on front backplane
SAS 0 and SAS 1 connectors on front
backplane
NVMe 0, NVMe 1, NVMe 2, and
NVMe 3 connectors on front
backplane
Signal connector on the rear hot-
swap drive assembly
4
might not be available
To
system board
NVMe 0-1 and NVMe 2-3 connectors
on the system board
C2 connector on the 24i RAID
.
Chapter 2
Server components
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem sr650 7x05Thinksystem sr650 7x06

Table of Contents