Siemens SIMATIC S5 Manual page 110

IP 265
You may make your entries in the input fields by typing them in character by character on the
keyboard, or by picking them from the relevant selection windows. You can screen information on
input fields and editing options by pressing <F7> "Info".
Note
The configuring data belongs to the IP 265 user program, and is stored together with
that program in program memory. On a cold COM 265 restart, the configuring data for
the selected IP 265 user program is inserted in the appropriate fields in the COM 265
"Configure" form.
Note
You must make any necessary modifications in the "Configure" form prior to compiling
the IP 265 user program, at the latest.
Example:
Debouncing input I 0.0
Position the cursor to the "Debounce 24 V inputs (I0.7..I0.0)" input field.
Move the cursor character by character to the right in the input field until you reach the
rightmost character.
Enter a "1" on the programmer keyboard.
Confirm your entry with < 1 > or <INSERT> (or revoke it with <ESC>).
Configuring "active" response from the IP 265 inputs/outputs in the event of a CPU STOP
Set the cursor to the "IP265 response to a PLC STOP" input field
(unless it is already positioned at this field!).
Open the associated selection window with <F1>.
Position the cursor to the text line "ENABLED".
Confirm your selection with < 1 > or <INSERT> (or revoke it with <ESC>).
Store the two items of configuring data in program memory by pressing <F6>.
If all entries are successful, input I 0.0 appears in the control system flowchart marked with an "at"
sign (@).
EWA 4NEB 812 6130-02a
Programming the IP 265 with COM 265
9-5