IP 265
7
Startup, Loading and Operating States
7.1
Function Model of a Startup
A function model is used to illustrate the basic user inputs required for startup of the IP 265
( Figure 7-1).
You determine the function of the IP 265 in the IP 265 user program. The IP 265 is programmed and
tested by means of COM 265 at the programmer/PC.
Note
You only need to plug the standard submodule into the module if you want to use a
standard program. In this case, startup is terminated.
EWA 4NEB 812 6130-02a
Startup, Loading and Operating States
7-1