Interface To The External I/O Bus; Overview Of The Module - Siemens SIMATIC S5 Manual

Technical Description
Figure 2-2 shows the position of the interfaces on the front of the module.
STOP RUN
I O
I
N
P
U
T
I
N
O
T
U
E
T
R
P
F
U
A
T
C
E
6
HIGH
L+
SPEED
24 V
SUB
M
CONTROL
6ES5 265-
1 2 3
8MA01
Note
In order to avoid confusion of the connections of the 24 V digital inputs and 24 V digital
outputs, a 9-pin sub D plug connector and/or a 9-pin sub D socket connector is
available on the module.
Note
You will find a summary of all technical specifications of the module in Appendix B of the
manual: "Technical Specifications".
2.2

Interface to the External I/O Bus

The interface to the external I/O bus is on the rear of the module. Section 3.1 "Assembly and
Removal of the IP 265" tells you how to connect the IP 265 and the I/O bus.
2-2
Elements on the fronplate
Status and fault
indication
Memory submo-
dule receptacle
Digital inputs
(24 V)
Digital outputs
(24 V)
Expansion
inputs/outputs
Differential inputs
(5 V)
Connector for
24 V load voltage
Figure 2-2. Overview of the Module
LEDs
for EPROM,
EEPROM
Sub D connector
9-pin
Sub D connector
9-pin
Sub D connector
15-pin
2-pin
EWA 4NEB 812 6130-02a
IP 265