Siemens SIMATIC S5 Manual page 144

IP 265
Entering connectors in the logic field:
Move the cursor to the connecting line in which the connector is to be inserted (input or output
of a language element).
Select the "#" element in the softkey menu by pressing <F9>. The input field, with the "#"
character, is displayed at the required position.
Add a symbolic identifier.
Confirm your entry with <1> or <INSERT>.
Example: Connectors in the input bar and logic field
IP265 program: IP265
# KON1
&
I 0.0
#KON2
.
I 0 1
The IP265 program utilizes approx. 8% of the IP265's capacity
F1 F2
& >=1
Note
Connectors can be "written" only once in the IP 265 user program, but they can
be"scanned" as often as required and at various points in the program.
EWA 4NEB 812 6130-02a
Segment: 1 of 1
#KON1
F3 F4 F5
Insert ---0 S/R..
Figure 9-12. "Editor" Form; Enter Connectors
Programming the IP 265 with COM 265
Valve closes
>=1
F6 F7 F8
T
CU/D >=<
Assign-
ment-
line
Q 0.5
F9 F10
# Special
9-39