Siemens SINUMERIK 840D Description Of Functions page 57

02.99
Unlisted valve data
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
When you select an unlisted valve, you must enter the valve machine data
manually. You can also preset the machine data to the settings of a similar
valve.
Fig. 3-7 "Unlisted valve data for HLA" menu display
Press the "Continue" softkey to call menu display "Cylinder data". These data
are also transferred to the drive at the end of the start-up operation.
By pressing vertical softkey "Preset", you can go to the corresponding menu
display in which you can preset machine data by selecting "OK". You then re-
turn to menu display "Unlisted valve data for HLA".
Fig. 3-8 Menu display "Preset unlisted valve for HLA"
When you press "OK", the machine data in menu display "Preset unlisted valve
for HLA" are preset. You then return to this menu display.
3 Start-Up
3.4 Valve selection
3-57