Siemens SINUMERIK 840D Description Of Functions page 6

How to use this
manual
Definition:
How is a qualified
person defined?
Software
versions
!
vi
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
Should further information be desired or should particular problems arise which
are not covered sufficiently for the purchaser's purposes, the matter should be
referred to the local Siemens Sales Office.
The following guide information is provided to help you reference information in
this Description of Functions:
S
General table of contents
S
Header (as orientation aid):
– The top line of the header is the main section number
– The second line of the header is the subsection number
S
Appendix with
– abbreviations, terms and references
– glossary (index)
If you require further explanation of a particular term, function or opera-
tion, you will find references to pages containing further relevant informa-
tion in the glossary.
For the purpose of this Description of Functions and product labels, a "qualified
person" is one who is familiar with the installation, mounting, start-up and opera-
tion of the equipment and the hazards involved. He or she must have the follow-
ing qualifications
S
Trained and authorized to energize, de-energize, ground and tag circuits
and equipment in accordance with established safety procedures.
S
Trained in the proper care and use of protective equipment in accordance
with established safety procedures.
S
Trained in rendering first aid.
The SW versions specified in this documentation refer to the SINUMERIK 840D
control system and the HLD module.
The Description of Functions applies only to the software versions specified.
When a new software version is released, the Description of Functions for that
version must be ordered.
Important
This documentation applies to:
S
SINUMERIK 840D control and SIMODRIVE 611 digital drive system,
software version 5
 Siemens AG 2000. All rights reserved
02.99