Installing/Mounting
3.3 Mounting the Power Modules
3.3
Mounting the Power Modules
The Power Modules are designed to be mounted in accordance with the dimensional
drawings, in a cabinet using bolts, nuts and washers.
Note
EMC
Due to EMC, it is recomended to fix the inverter on an electrically conductive cabinet wall.
In case of a Push through unit the electrical connection is achieved by fixing the Power
Module with the recommended bolts and screws on the electrical conductive cabinet wall.
Dimensions drawings
The dimension drawings shown in the following figures are not true to scale.
3.3.1
Build-in Power Modules - IP20
Drill patterns, dimensions and distances of Power Modules PM230, IP20
16
Power Module PM230, IP20 / Push through
Hardware Installation Manual, 03/2012, A5E03448282B AA