Emc-Compliant Wiring - Siemens SINAMICS G120P Hardware Installation Manual

Connecting
4.2 EMC compliant connection
4.2.6

EMC-compliant wiring

EMC compliant wiring of the Power Module
Using two examples, the following diagram shows the EMC-compliant installation of Power
Modules with and without shield plate.
Note
Power Modules PM240-2 and PM230, FSA ... FSC
For an EMC-compliant installation, you must use the shield plate.
The shield of the control cable must be installed both on the shield plate of the CU and on
the shield plate of the Power Module.
Note
The display in the following diagram is not to scale. The terminal cover cannot be removed. It
was only taken out of the diagram to better show the cable connection.
9
34
1
8
5
6
3 8
2
10
4
Hardware Installation Manual, 03/2012, A5E03448282B AA
1
8
7
3
Power Module PM230, IP20 / Push through
2
5
4