Siemens SINAMICS G120P Hardware Installation Manual page 39

Cooling fan replacement for FSD ... FSF
Removal
● Power-down the inverter
● Disconnect all the cables from the Power Module
● Remove the fan retaining board (
● Release the fan cable connectors (
● Remove the cooling fan out from the inverter (
Figure 5-1 Cooling fan removal FSD and FSE
Figure 5-2 Cooling fan removal FSF
Installation
For re-installation, carry out the above steps in reverse order.
Power Module PM230, IP20 / Push through
Hardware Installation Manual, 03/2012, A5E03448282B AA
①②
)
③
)
④⑤
)
Service and maintenance
5.2 Replacing the cooling fan
39