Removal And Installation Of Operator's Cab - Komatsu Galeo PC800-8 Shop Manual

SEN01059-01
Cab and its attachments
Removal and installation of
operator's cab
Removal
k
Disconnect the cable from the negative (–)
terminal of the battery.
1. Remove rear covers (1), (2), (3), and (4).
2. Remove duct (5), cover (6), and plate (7).
3. Remove plate (8), duct (9) and the element.
a Remove the duct lock clip.
4. Disconnect connector S13 (10).
5. Disconnect cab wiring connectors N02 (11),
M10 (12), H08 (13), and H09 (14).
a Remove the clip and separate the wiring
harness from the cab.
2
6. Remove air conditioner connector plate (15).
1
7. Disconnect connectors L03 (16), H03 (17),
H04 (18), and H05 (19).
8. Disconnect upper and lower duct joints (20)
and (21).
9. Remove controller sub-plate (22) and incline it
against the air conditioner.
50 Disassembly and assembly
PC800, 850-8
1