Special Tools List - Komatsu Galeo PC800-8 Shop Manual

50 Disassembly and assembly

Special tools list

a Tools with part number 79
tured).
a Necessity: t
q
a New/Remodel: N
R:
Blank:
Q
a Tools marked
in the Sketch column are tools introduced in the sketches of the special tools (See
Sketches of special tools).
Component Symbol
Removal and instal-
lation of fuel supply
pump assembly
Removal and instal-
lation of cylinder
head assembly,
engine rear seal
A
Removal and instal-
lation of engine front
seal, rear seal
Installation of PTO
B
(coupling) assembly
PC800, 850-8
Q QQQ QQQQ
T- -
Cannot be substituted, must always be installed (used)
Extremely useful if available or can be substituted with commercially available
part
Tools with new part numbers, newly developed for this model
Tools with upgraded part numbers, remodeled from items already available for
other models
Tools already available for other models, can be used without any modification
Part No.
795-630-5500 Standard puller
1 01010-81090 Bolt
01643-31032 Washer
2 790-331-1110 Wrench (Angle)
3 795-931-1100 Seal puller
795T-421-1230 Push tool
4 01050-31645 Bolt
01050-31625 Bolt
795T-421-1220 Push tool
5 01050-31625 Bolt
01050-31645 Bolt
795-521-1110 Push tool
6
01050-31640 Bolt
Pin gauge
Pin (7.50 mm
Commercially diameter x 6.30
2
available mm notch height)
for the bore of
module of 3.75 mm
Commercially Micrometer for the
3
available bore (75 – 100 mm)
Pin gauge
Pin (9.00 mm
Commercially
4 diameter) for the
available
module of 5.0 mm
outside diameter
Pin gauge
Pin (10.00 mm
Commercially diameter x notch
5
available height of 8.40 mm)
for the bore of
module of 5.0 mm
Commercially Micrometer for the
6
available bore (100 – 125 mm)
1
cannot be supplied (they are items to be locally manufac-
Part Name
t 1
t 2
t 2
q 1
t 1
t 1
t 4
t 4
t 1
t 4
t 4
t 1
t 3
t 2
t 1
t 2
t 2
t 1
SEN01052-01
Nature of work, remarks
Pulling out of drive gear
Tightening of cylinder head bolt,
flywheel bolt
Pulling out of oil seal
N Q
Press fitting of engine rear seal
(Standard type)
N Q
Press fitting of engine rear seal
(Sleeve type)
Press fitting of engine front seal
N
N
N Measuring spline wear
N
N
7