Toshiba SL-5300 Series Owner's Manual page 136

15. SET UP MODE
Procedure
Item
Changing the PLU data
1) Auto Code (UPC Code)
(1) Touch the [AUTO CODE] key.
(2) When the Data contents area is touched, the Auto Code Setting screen will appear.
(3) Input a numeric data and touch the [Decision] key.
AUTO CODE key
2) Mode Flag
(1) Touch the [MODE FLAG] key.
(2) When the Data contents area is touched, the Mode Flag Setting screen will appear.
(3) Touch the [Weigh], [Fix price], or [By count] key.
MODE FLAG key
1. Select a desired item key. (only one item)
2. The selected item appears on the Appointed data area.
3. Input the start PLU No.
4. Input the end PLU No.
5. Touch the Data code area or Data contents area to enter a number
of data.
NOTE: Data setting procedure differs depending on the data to be
changed. Refer to the following pages. See also Section 14.2 for the
max. values and notes.
6. Touch the [GO] key to change the data.
15-41
15.5 PLU Data Maintenance
Procedure
Data contents area
Data contents area
EO1-31009
Decision key