Toshiba SL-5300 Series Owner's Manual page 221

24. ERROR MESSAGE TABLE
(Continued)
Error Message
This makes Print Field
be gone.
Data is over the File
capacity.
Please perform
Initialize except
standard Format.
UP. Discount value is
incorrect.
Input code is out of
range.
Vendor is not found.
FC is in busy.
FC Timeout Error
occurs.
Deleting of PLU is
prohibited before
Reset.
Tare required.
%Tare Weight over.
Scale failed in
transmission of Data.
Cause
Print field may be gone by operations
such as reducing label length.
There is no vacant area in Flash-ROM for
label format files.
FSP discount unit price exceeds the
regular unit price.
The Start Code exceeds the End Code.
The selected vendor name doesn't exist.
Local communication error.
Local communication error.
Master scale is in busy.
The selected PLU total memory is not
reset.
Tare is not set before label issuing in
compulsory tare mode.
The % tare weight is over the maximum
limit.
Because of communication error, the data
in the satellite scale in OFF-LINE mode
cannot be transmitted to the master scale.
Set the print position correctly.
Delete the print field data.
Sort the files by the [SORT] key
Initialize the format files.
Set the FSP discount unit price being
cheaper than the regular unit price.
Re-program the Start Code and the End
Code correctly.
Program the vendor name and the
Number.
Wait a moment.
Turn on the backup master scale, and
then check the connection and the
communication setting regarding local
communication.
Turn on the backup master scale, and
then check the connection and the
communication setting regarding local
communication.
Reset the PLU total memory, and then
delete the PLU.
Subtract the tare, and then enter the PLU
data.
Reduce the quantity of items to be
weighed.
Make sure the % tare weight.
Turn on the backup master scale, and
then check the connection and the
communication setting regarding local
communication.
24- 3
EO1-31009
24. ERROR MESSAGE TABLE
Solution