Combination Report Setting - Toshiba SL-5300 Series Owner's Manual

14. PROGRAMMING MODE
Procedure
Item
Selecting the scrolling
message sub No. and
assigning the
message/logo
Display method
Display time
Cancel
NOTE: Scrolling logos can be displayed only on the 256 x 64 dot full dot display, within the size of 256 x 64
dots area.

14.11 Combination Report Setting

You can set the combination of the reports with this menu.
One combination report consists of up to 8 kinds of report, which allows issuing 8 different reports at
the same time.
The following screen will appear when the [Combination Report/Reset] key of the Programming
Mode Main menu is touched.
EDIT key
1. Touch the scrolling message sub number area to select.
2. Touch the same scrolling message sub number area again to select a
message/logo.
3. The Message/Information list or Logo list will appear.
4. Touch the desired message/logo.
1. Touch the scrolling message sub number area to select.
2. Input the message No. or logo No. to be assigned.
3. Touch the [MSG. LINK] key.
Select the desired display method from the 7 options.
STAY: Max. 20 characters can be displayed. No animation.
FLASH&STAY: Max. 20 characters are flashed. No animation.
OPEN/SHUT1: Max. 20 characters are alternately covered toward and
opened from the center in horizontal direction.
OPEN/SHUT2: Max. 20 characters are alternately covered toward and
opened from the center in vertical direction.
GO LEFT: Max. 32 characters are scrolled leftward.
GO UP: Max. 20 characters are scrolled upward.
STACK: Max. 32 characters are scrolled leftward and stuck at
the left end.
NOTE: All options are selectable when the customer's display is an optional
full dot display, however, with the standard customer's display (5x7-dot
display), only Stay, Flash&Stay, and Go left are available.
1. Input a numeric data. (Unit: second)
2. Touch the [TIME] key.
1. Touch the desired scrolling message sub number area.
2. Input the sub number (1 - 8) to be canceled.
3. Touch the [CANCEL] key.
14-33
14.11 Combination Report Setting
Procedure
Combination report area
EO1-31009