Panasonic PAW-VP1000LDHW Installation Manual page 64

How to make Settings
!
Important
All settings are necessary, otherwise faultless operation is not possible. Please follow the se-
quence described above!
M PAW-VP380L – U-200PZH2E8 (PACi R32)
Indoor Unit Tank detailed settings; Remote controller CZ-RTC5B
i
Note
"DN" codes 10 & 11 must be set first.
"DN" 15 display temperature sensor TA, E1, E2, E3*, BL* change 0022 -> 0031
8
* to be purchased separately
Outdoor unit detailed settings by CZ-RTC2/4
64
Parameter Default
"DN" code value
10 0006
11 0015
06 0004
0b 0002
0C 0000
0d 0000
15 0022
16 0000
1F 0000
20 0000
21 0030
22 0018
28 0001
2C 0000
2d 0008
Parameter Default
"DN" code value
7 000
42 002
4b 001
4E 000
4F 000
A5 000
New value
Explanation
to set
0031 Unit Type
0021 Capacity code
0000 Inlet temperature shift in heating mode.
0001 EXCT setting
0001 Heating preparation display
0001 Cool/ Heat auto
0022 Temperature sensors
0000 Fan speed adjustment
0015 Cooling upper limit 15°C
0005 Cooling lower limit 5°C
0055 Heating upper limit 55°C
0035 Heating lower limit 35°C
0001 Automatic restart after power failure activated
0006 Expansion valve setting
0010 Operation mode Cooling and Heating
New value
Explanation
to set
001 Specific tank setting
000 Tank offset
001 Specific tank setting
Condensation temperature minimum
005
shift in heating
Condensation temperature maximum
005
shift in heating
-04 Frost adherence temperature
Check and adjust
Check and adjust
DHW PAW-VP - Installation manual – 2020-05