Connecting The Power Cables - Huawei NE05E Series Quick Installation Manual

3

Connecting the Power Cables

a
Connecting the AC Power Cables
1
NOTE
•Insert the power plug, and use the cable tie to fix the plug connected to the device, preventing the plug from
getting loose or falling off.
•Ensure that the power cable and other cables (E1 cable, optical fiber, and network cable) are routed in opposite
directions.
•If the NE05E-SQ requires AC power modules, you must install both AC power modules.
ATN 910 I AC
The cable tie
13
NE05E-SI
The peer terminal of the power
cable, whose model is M4, is
connected to the power distribution
box on the left side of the cabinet.
The OT terminal must be
assembled on site. For detailed
operation procedure, see Appendix
Assembling the OT Terminal.