Huawei NE05E Series Quick Installation Manual page 27

4
Paint Repair
1. Codes of Color Samples
Object
Cabinets (including the APM30H)
Base
2. Operation Instructions
Polishing
If a damaged area is stained or the materials are rusty, polish the damaged area or the rusty materials by
using a piece of fine sand paper to remove the stain or rust.
Cleaning
Use clean cotton cloth to rub the stain or dust on the surface of the area to be polished or repaired.
Paint repair
Apply brushing paint in appropriate color according to the original coating. Before the repair, shake the paint
properly. After that, use the small brush inside the bottle to absorb paint and evenly spread on the damaged
area till the scratch/damage is covered. Note that the paint coating applied needs to be as thin as possible.
Ensure that the paint coating does not reveal drops, and keep the surface smooth.
Drying
Put the surface of the repair paint in a place at room temperature for 30 minutes, and then perform
subsequent operations.
Quality
The color of the surface of the repair area needs to be consistent with that of the surrounding areas of the
repair area, without obvious edges and bulge. The scratch or damage needs to be covered properly, and no
dropped paint exists.
Color Name Huawei Color Code
RAL7035 YB026
3010 light grey YB030
24
International Color Code
RAL7035
Pontone 422U