Panel Board Removal - Epson Perfection 1200U Service Manual

EPSON Perfection1200

4.2.8 Panel Board Removal

1. Release the carriage lock. (See Section 4.2.1)
2. Remove the document cover. (See Section 4.2.2)
3. Remove the upper cover. (See Section 4.2.3)
4. Remove one gold screw (CBS, M3x6), and the shield cover for the panel
board.
In the next steps, move the carriage back and forth slowly
by hand, according to your necessity.
5. Disconnect the connector of the panel board from the power unit, then
remove the panel board assembly.
Disassembly and Assembly Disassembly Procedures
CBS (M3x6)
Figure 4-33. Panel Board Removal (1)
Connector
Panel Board
Assembly
Figure 4-34. Panel Board Removal (2)
Revision B
50