Epson Perfection 1200U Service Manual page 82

EPSON Perfection1200
3. Insert (-) driver into the gap shown in the figure below, and remove the
white standard board by pushing it to the arrowed direction.
Slide the white standard board to
this direction strongly and release
White
standard
board
Figure 7-23. Removing the white standard board (1)
4. Release the lock of the shaft supports at right and left and remove the
roller shaft (rear).
Appendix
the hook.
Insert (-) driver into
this gap and push
Figure 7-24. Removing the white standard board (2)
ADF: Disassembly
Removed white
standard
Release the lock of
shaft supports.
Remove the
roller shaft (rear)
Figure 7-25. Roller Removal
Revision B
82