EPSON Perfection1200
4.2.9 Power Supply Board Removal
1. Release the carriage lock. (See Section 4.2.1)
2. Remove the document cover. (See Section 4.2.2)
3. Remove the upper cover. (See Section 4.2.3)
In the next steps, move the carriage back and forth slowly
by hand, according to your necessity.
4. Remove the cable of the panel board from the power supply board
connector (See figure 4-34)
5. Remove AC cable connector (lock type;Pick and release) from the power
supply board.
Disassembly and Assembly
Figure 4-37. Power Supply Board Removal (1)
Disassembly Procedures
Connector
AC Cable
Revision B
52