Optional Part; Adf; General Description; Specification - Epson Perfection 1200U Service Manual

EPSON Perfection1200

7.5 Optional Part; ADF

7.5.1 General Description


Features


Compact and Light weight (319(W) x 451(D) x 137(H) mm), Approx.
2.2Kg


Capacity of paper setting is up to 20 pieces.


Scanning speed is 3 PPM (at A4, Line art, 300 dpi, and Draft mode)


Using a transparency film to scanning area. User can change the
transparency film. (10 k-pieces of paper are readable by one
transparency film)

Connectivity
This Automatic Document Feeder ADF can be used for GT-7000 series
and Perfection 1200.
Figure 7-8. Scanner with ADF
Appendix

7.5.2 Specification

7.5.2.1 General Specification

Product type:

Paper supply:

Paper out:

Separate paper way:

Paper setting quantities:

Original point:

Scanning area:

Document setting position: Set the left side of Document to the left
7.5.2.2 Efficiency

Noise:

Miss feed ratio:

Jam ratio:

Pile up feed ratio:

Skew:

Original point accuracy: 0

Feeding pitch accuracy: Less than

Color deviation:
Optional Part; ADF
Sheet through
Face up load
Face down eject
Friction by roller
2
20 pcs (at 55g/m paper, Maximum total
thickness is less than 4mm)
Opposite side against Scanner original point
Scanning through a Transparency sheet
side of ADF's paper setting and support
the right side of Document by ADF's
paper guide.
54dB or lower, No unpleasant and abnormal noise
1% or lower
1% or lower (0.1% or lower, at XEROX-Paper and
room temperature)
1% or lower
± °
Less than 0.5 C
±
3mm, from Document left edge and
Document top edge
±
1%
Less than 1 dot (at 600dpi)
Less than 2 dot (the document area of top
and bottom 5cm)
Revision B
75