Huawei USG6000 Series Hardware Manual page 173

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Figure 2-2 Positions of floating nuts
Use M6 screws to fix the floating nuts at the positions specified in
Figure
Figure 2-3 Installing floating nuts
Step 3 Mount the USG in the cabinet.
1.
Issue 03 (2015-01-26)
2-3.
Use a Phillips screwdriver to fix M6 screws into two floating nuts of the lower row but
do not secure them, leaving a 2 mm spacing, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
Figure 2-2, as shown in
Figure 2-4.
163