Huawei USG6000 Series Hardware Manual page 256

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
2.
3.
4.
The OT terminal may rotate and result in device damage. Make sure that it is independent of
the adjacent metal mechanical part or other terminals.
Technical Specifications
Table A-1
Table A-1 Technical specifications of the PGND cable
Name
PGND cable
Issue 03 (2015-01-26)
Figure A-3 Installing the OT bare crimp terminal
Select a matching screw for the screw jack and turn the screw in clockwise direction to
fasten it. For reliable connection, make sure that at least two full threads match each
other.
Pull the power cable gently to verify that it is well connected.
Connect the other end of the PGND cable to the ground port of the equipment room or
cabinet.
shows the technical specifications of the PGND cable.
Terminal
Terminal
Cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Naked Crimping Terminal,OT,6mm
Plating,Insulated Ring Terminal,12~10AWG,yellow
Naked Crimping Terminal,OT,6mm
Plating,Insulated Ring Terminal,12~10AWG,yellow
Power Cable,450/750V,H07Z-K
2
UL3386,6mm ,Yellow/Green,Low Smoke Zero Halogen
Cable
A Appendix
2
,M6,Tin
2
,M4,Tin
246