Huawei USG6000 Series Hardware Manual page 177

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Context
Tools






Procedure
Step 1 Determine the locations of two mounting holes on the wall using a ruler and mark the
mounting holes with a marker. The mounting holes must be on the same horizontal level.
Figure 2-7 Spacing between mounting holes
Step 2 Drill holes and install mounting screws.
Issue 03 (2015-01-26)
Ruler
Marker
Hammer drill
Vacuum cleaner
Hammer
Phillips screwdriver
 The wall must be a bearing wall. Otherwise, the wall is not suitable for wall-mounting.
 Ensure that the height of mounting holes is proper so that the indicators are easy to view.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
167