Huawei USG6000 Series Hardware Manual page 249

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
3.
4.
5.
Issue 03 (2015-01-26)
Figure 3-10 Removing the power module (USG6650/6660/6670/6680)
Note down the cause and time of the replacement as well as the bar code of the replaced
power module and then put away the replaced power module.
Take the new power module from the packing box and check whether its model is the
same as the replaced one.
Push the new power module inside the chassis. Hold and push the module towards the
chassis. Push the handler in place and fasten the screws.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Maintaining the Hardware
239