Project Example; Passwords - Siemens SINAMICS S120 Manual

SINAMICS S120 Fail-Safe Drives
6

Project example

In this chapter, you will learn how the individual components must be pa-
rameterized. Both STARTER as well as also SIMOTION SCOUT can be
used as engineering software for SINAMICS S120. Distributed Safety is re-
quired to program the F-CPU.
A description is subsequently given as to how the software project associ-
ated with this function example was set-up.
6.1

Passwords

For reasons of simplicity, in the project, one common safety password is
used for the SIMATIC components for both the program and hardware.
One password is also used for the safety configuring of the SINAMICS
components for the drives and for the TM54F terminal expansion module.
•
Safety password on the F-CPU: "0"
•
Safety password on SINAMICS: "1"
These passwords should be changed for real applications!
I DT Safety Integrated Page 20/43
Entry ID: 28424136
MC-FE-I-005-V11-EN