Connection Example - Siemens SINAMICS S120 System Manual

Voltage Protection Module (VPM)

6.4 Connection example

Cable entry
Gland
1) There are 4 connection points for phases U, W and PE - and there are 2 connection points for phase V.
The glands must be separately ordered.
2)
Note
Power cables with cross-sections of > 50 mm
Voltage Protection Module are implemented using 2 parallel cables.
6.4 Connection example
Figure 6-4
86
2)
Connection example for a shared power cable at the VPM 200 Dynamik
VPM 200 Dynamik
For cables with ∅40 mm max.
4 x M50
e.g. from Pflitsch,
article designation: UNI DICHT EMV 250584117
Locknut M50: GM250PA
(AWG 1) between the HF Choke Module and the
2
System Manual, 10/2020, 6SL3097-5AH10-0BP0
High Frequency Drive