10.6
Electrical connection
10.6.1
Preparing the cables
1. Prepare the DC link connecting cables as shown below.
2. Only use shielded cables with insulated end sleeves.
①
②
Figure 10-3
Refer to the table below for dimension A:
Conductor cross-sec‐
35 / 50 / 70 / 95 / 120
High Frequency Drive
System Manual, 10/2020, 6SL3097-5AH10-0BP0
30 (1.18)
1
30 (1.18)
1
Protective braided shield folded back and fixed using shrink-on sleeve
Insulated end sleeve
Single-core and two-core DC link connecting cable with insulated end sleeves, all
dimensions in mm and (inch)
Mounting location of the DC link
tion [mm
]
adapter at the drive line-up
2
A
A
Left
Right
DC link adapter
10.6 Electrical connection
2
2
Connection
A [mm]
DCP
60
DCN
70
DCP
60
DCN
70
151