Resetting The Unit - JVC PC-XC370 Instructions Manual

CAUTIONS:
• When not using the unit for a long time (more than two
weeks) or when always using on household AC, remove the
batteries to avoid a malfunction or damage to the unit.
• When the JVC power cord provided with this unit is
connected, the power is automatically switched from the
batteries to the household AC even when the batteries are
inserted. Remove the batteries when using the power cord.
When the batteries are nearly exhausted, every time the unit
is used, the power will be turned off after about 1 minute.
When making an important recording, use new batteries
(preferably alkaline batteries with a longer service life) to
avoid any possible failure.
For better battery usage
Continuous operation of the unit causes the battery power to
be consumed quicker than noncontinuous operation.
Operation of the unit in a cold place causes the battery power
to be consumed more quickly than in a warm place.
• For power supply, the use of household AC is
recommended, when continuous operation of the unit is
required over a longer period of time.
To operate on a car battery
Use an optional exclusive car adapter (JVC model CA-R120)
to connect the DC IN 12V jack on the rear of the unit to a
cigarette lighter socket of a car.

Resetting the Unit

If normal operations are disabled, reset the unit.
1 Turn off the power.
2 Press the RESET button on the rear of the
unit with the tip of a small screwdriver or
similar object.
3 Turn on the power.
4 Set the clock. (See page 9.)
If necessary, preset the desired stations again. (See page 11.)
–8 –