Recording; Recording Tapes On Deck A - JVC PC-XC370 Instructions Manual

Recording

IMPORTANT:
• It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable program and in any
literary, dramatic, musical, or artistic embodied
therein.
• The recording level is automatically set correctly, so it is
not affected by the JOG-VOLUME control. Thus, during
recording you can adjust the sound you are actually
listening to without affecting the recording level.
• While recording, you can hear sound modes and/or the
Hyper Bass Sound effect through the speakers or
headphones. However, the sound is recorded without these
effects (see page 10).
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Increase the distance
between the TV and the unit.
• Use only type I tapes for recording.
To protect your recording
Cassettes have two small tabs on the back to protect
unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.

Recording Tapes on Deck A

1 Press STOP/EJECT § for the deck A.
2 Put in a recordable cassette, with the exposed
part of the tape down.
3 Close the cassette holder gently.
4 Prepare the source to be recorded.
• To record from FM or AM, press TUNER to select the
band and tune in a desired station.
• To record from a CD, load the CD in one of the disc
trays, start playback, and stop it to select that CD.
5 Start recording.
Press REC ¶ for deck A. PLAY 3 is pressed
simultaneously, and recording starts.
• When the source is CD and the CD is in stop mode, CD
playback starts automatically from the first track.
• When the source is CD and the CD is in pause mode,
CD playback starts automatically from the position in
pause.
• When the tape reaches its end, recording stops and CD
play also stops automatically.
To stop during recording, press STOP/EJECT § for
deck A.
To stop recording temporarily, press PAUSE 8 for deck A.
To resume recording, press PAUSE 8 again.
– 17 –