Cabinet Mounting Rails; Vertical Lifting Of Cabinets; Figure 34: Cabinet Mounting Rails; Lifting Cabinets Vertically - Motorola ASTRO 25 GTR 8000 Manual

MN003286A01-E
Chapter 3: GTR 8000 Base Radio Installation
3.4.2.3

Cabinet Mounting Rails

The figures show the dimensions and spacings of the mounting rails inside both the 31 in. and 47 in.
cabinets. The mounting rails are square hole and require cage nuts for additional equipment
installation.

Figure 34: Cabinet Mounting Rails

3.4.2.4

Vertical Lifting of Cabinets

Motorola Solutions made no provision to enable the removal of a harness after the equipment has
been lifted and placed flat onto a surface. Your organization must provide those provisions.
3.4.2.4.1

Lifting Cabinets Vertically

When and where to use: Use this procedure to lift the cabinet with a harness and place onto a flat
surface.
Procedure:
1 Place two temporary supports onto the floor or flat surface. Position the supports to facilitate the
removal of harness. See Figure 35: Lifting a Cabinet with a Harness on page 98.
97