MN003286A01-E
Chapter 4: GTR 8000 Base Radio Configuration
5 In the Serial Port field, select the communication port that matches the one selected on the
service computer/laptop.
6 In the Baud Rate field, select the baud rate with which you want to communicate with the
device.
•
Baud Rate 19200
7 Click Connect.
A login/password prompt screen appears.
Figure 55: CSS Login Banner
8 Provide the required credentials. Perform one of the following actions:
•
If a domain controller is available on the network, enter the Username and Password for the
RADIUS service user account assigned to the netwadm group in the Active Directory. (The
default service user is serviceuser.)
•
If a domain controller is not available on the network, enter the Username and Password for
the local bts_service account.
•
If the Elevated Privileges Password field is active, enter the Elevated Privileges
Password that was set up for this device.
When accessing the device, if the default passwords do not work, the passwords may have
been set to default values by a different system release of software. See "Resetting Device
Passwords" in the CSS Online Help to reset the passwords to the current software release
defaults. If Authentication Services are not enabled on a device, type any alphanumeric
characters to populate the [Username, Password, and Elevated Privileges Password] fields,
as they cannot be left blank.
9 To access the device and close the dialog box, click OK.
The blank CSS main window appears.
NOTICE: The Service menu is not available until you read the configuration file from the
device using an Ethernet connection.
136