Silvercrest SLB 10 A1 Operating Instructions Manual page 55

♦ Press and hold the
the speaker off and deactivate the Bluetooth
a series of beeps. The operating/charging LED 9 flashes blue and
orange twice simultaneously and then goes out.
NOTE
► If you do not establish a connection between the speaker and your
Bluetooth
automatically. In this case, you will have to switch the speaker back
on before restarting the pairing process.
► If the speaker stops receiving a signal while in Bluetooth
the speaker will switch off automatically after around 10 minutes.
► The next time you turn on the speaker, it will connect automatically
to the last-connected Bluetooth
device does not reconnect to the speaker automatically, you will
have to re-establish the connection manually. A detailed description
of how to do this can be found in the operating instructions for your
Bluetooth
■ 52 │ GB │ IE
button 1 again for about 3 seconds to switch
device within 6 minutes, the speaker will switch off
®
device.
®
function. You will hear
®
device. If your Bluetooth
®
mode,
®
®
SLB 10 A1