Huawei NetCol5000-C Series User Manual page 81

NetCol5000-C(065, 080) In-row Chilled Water Smart
Cooling Product
User Manual
Parameter
Control point
temperature
setpoint
Control point
humidity setpoint
Step 4 Go back to home screen, and tap Running > Device Details > T/H sensor to check that the
cold aisle temperature and humidity are displayed and the values are reasonable.
Issue 07 (2020-03-16)
Description
After the Temperature and
humidity control type and the
temperature value under this
type are set, the device conducts
cooling or heating based on the
settings.
After the Temperature and
humidity control type and the
humidity value under this type
are set, the device conducts
humidifying or dehumidifying
based on the settings.
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning
Configuration Principle
the temperature is to be
controlled based on the
minimum data value collected
by the collector.
Set this parameter as required.
 Return air temperature: 26–35° C
recommended
 Supply air temperature:
18–24° C recommended

Cold aisle temperature: 18–24° C
recommended
 Hot aisle temperature: 26–35° C
recommended
Set this parameter as
required.40%–60% RH
recommended
73