Mitsubishi Electric MELSEC iQ-R Series Quick Start Manual page 39

7.
Writing to the Simple Motion module
1. Select [Online]  [Write to PLC...] to open the Online Data Operation window on MELSOFT GX Works3.
2. Select the Simple Motion module setting.
3. Click [Execute] to write the parameters and data to the Simple Motion module via the PLC CPU.
4. The confirmation message window for flash ROM overwriting appears. Click [Yes].
5. Click [Close] to complete the writing to the Simple Motion module.
1.
[Writing data to the Simple Motion module]
• Parameters and servo parameters
• Positioning data and block start data
• Synchronous control parameters and cam data
2.
3.
4.
3 POSITIONING CONTROL STARTUP
3.3 Parameter Settings for Simple Motion Module
3
37