Removing The Pendulum Shaft - Husqvarna 967187001 Workshop Manual

Repair Work

7.7 Removing the Pendulum Shaft

1
Follow steps 1 to 12 in "7.6 Changing Articulated
Steering Bearing".
2
Dismantle the front left cover
3
Remove all the cables laid out between the front
and the rear carriage, in their rear attachments.
Note their routing.
4
Remove the screw (4) holding the pendulum shaft
4
package.
To be able to remove the screw, the battery must
be lifted out, see "6.3" steps 1 to 8.
5
Pull the pendulum shaft (1) with the washer (2) out.
3
The ring (3) will come off.
1
2
40
English –