Changing Microswitch, P-Brake - Husqvarna 967187001 Workshop Manual

Repair Work

7.14 Changing Microswitch, P-brake

1
Dismantle the cables from the switch.
2
Dismantle the attachment with switch by loosening
the screw and nut.
3
Loosen the switch by drilling out the pop rivets with
a 5 mm bit.
4
Fit new microswitch by riveting it onto the
attachment.
5
Refit the switch with attachment and cables.
6
Check that the microswitch is activated when the
brake pedal is pressed all the way down.
52
English –