Silvercrest SLS 35 A1 Operation And Safety Notes page 9

and the power cord
heat, oil and sharp edges. Do
not touch the power cord
damaged or cut, but immediately
unplug the mains plug from the
socket. Damaged or tangled
power cords increase the risk
7
of electric shock.
FIRE HAZARD! Do not
cover the curling iron.
FIRE HAZARD! Do not
use the curling iron for
artificial hair.
Ensure there are no highly flam-
mable liquids near the curling
iron. This poses a fire hazard.
Do not use extension cords in the
bathroom to ensure the mains
plug is easy to reach in an emer-
gency.
When using the curling iron in a
bathroom, always unplug it after
use, as the proximity of water
presents a hazard, even if the
curling iron is switched off.
Never use the curling iron
near or in water (e.g.
washbasin, shower, bath tub).
Never immerse the curling iron
in water. Never reach for an ap-
pliance which has fallen into wa-
ter and is still connected to the
mains socket. Unplug from the
mains socket immediately. For
away from
7
if
7
Important safety instructions
added protection we recommend
installing an earth leakage cir-
cuit breaker (ELCB) with a rated
trigger current not to exceed
30 mA into the electrical circuit.
Ask your electrician for advice.
Only plug the curling iron into
a mains socket with the voltage
specified on the type plate.
Never open the curling iron and
do not attempt to repair the curl-
ing iron yourself. Any modifications
will void the warranty.
Always unplug the power cord
from the mains socket by the plug.
Discontinue use of the curling iron
if dropped or otherwise dam-
aged.
Untangle the power cord
twisted.
Do not use accessories not rec-
ommended or sold as accessories
by the manufacturer.
Repairs must be performed by a
qualified specialist or a manufac-
turer authorised workshop. Im-
proper repairs may result in
considerable dangers to the user.
Never leave the curling iron un-
attended whilst in use.
Do not use the curling iron out-
doors.
7
if
7
GB 9