1-7. Front Panel Assembly Installation/Removal
1-7. Front Panel Assembly Installation/
Removal
n
To remove or to install the front panel assembly while the
main power is turned on, be sure to put on the earth-band
to ground the unit against electrostatic shock.
Removing/installing the front unit without earth-band
could cause wrong operation.
1. Loosen the four screws (with drop-safe) of the front
panel assembly.
2. While pressing the two panel brackets between the
ornamental panel and the front panel (B), remove the
front panel assembly.
RK
4 x 20
Panel
bracket
Front panel assembly
3. Install the front panel assembly by reversing the
disassembling procedure.
1-10 (E)
RK4 x 20
Ornamental panel
Panel bracket
Front
panel (B)
VSR-2000A