Huawei IPE Series Installation Manual page 24

IPE
Installation Guide
Figure 4-4 Fastening screws
Step 5 Take out the IPC and mount the IPC on the slot of the mounting base using screws at the
bottom of the IPC, as shown in Figure 4-5.
Figure 4-5 Mounting the IPC on the mounting base
Step 6 Adjust the position of the IPC, expose the cable outlet, and connect the multi-connector cable
of the IPC, as shown in Figure 4-6.
Issue 03 (2013-02-28)
Slot on the base
Screw
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
4 Installing an Infrared Waterproof Tube-Type IPC II
17