Huawei IPE Series Installation Manual page 47

IPE
Installation Guide
Figure 5-20 Disassembling the bracket and dome IPC
Step 2 Assemble the module that is equipped with the multi-connector cable, as well as the ceiling-
mounted bracket.
Route the multi-connector cable on the module through the elbow of the ceiling-mounted
bracket. Push the module into the ceiling-mounted bracket and rotate the module clockwise
for about five degrees until the module cannot be rotated any further.
Step 3 Use the three black screws that are removed in Step 1 to fix the module onto the ceiling-
mounted bracket, as shown in Figure 5-21. (Spare screws are available in the accessory kit of
the ceiling-mounted bracket.)
Figure 5-21 Routing the cable
Step 4 Stick the positioning label delivered with the IPC at the installation position of the dome.
Issue 03 (2013-02-28)
Upper cover
Bracket
-
Multi connector cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5 Installing a Vandal-Proof Do me IPC
Module
Lower cover
Inner liner
Three black screws
40