Huawei IPE Series Installation Manual page 59

IPE
Installation Guide
Figure 6-9 Installing white expansion particles
Step 3 Remove the three black screws on the black module base for future use. Ensure that the lower
cover is secured.
Step 4 Route the multi-connector cable of the IPC.
Step 5 Hold the IPC with one hand, and use the T15 star L-wrench with the other hand to fasten the
three black self-tapping screws onto the ceiling, as shown in Figure 6-10.
Issue 03 (2013-02-28)
White expansion particles
NOTE

If the top cabling mode is used, route the multi-connector cable through the 30 mm cable outlet on
the top.

If the side cabling mode is used, route the multi-connector cable through the side cable outlet of the
lower cover.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
A
B
A
A
B
6 Installing an Infrared Do me IPC
B
52